Ludwig Posted November 13, 2008 Share Posted November 13, 2008 Dear All,Novice help time!! I've never fitted master cylinder boot covers - what's the best way to fit them? With the mounting/cylinder off the bulkhead, or are their any tricks to fit them,Hope someone can help!Ta,Alex Link to comment Share on other sites More sharing options...
GTsixCA Posted November 14, 2008 Share Posted November 14, 2008 AlexMaybe easier on the car as the pedal box is then solid and not slipping through your hands. Bit of a pain getting the cleivs pin back in though...... Link to comment Share on other sites More sharing options...
Pete Lewis Posted November 14, 2008 Share Posted November 14, 2008 trouble is many ,including the repro ones have such a poor moulded groove and shape for the pedal box hole many just dont fit well whatever you do pete Link to comment Share on other sites More sharing options...
heraldcoupe Posted November 14, 2008 Share Posted November 14, 2008 peterhlewis wrote:trouble is many ,including the repro ones have such a poor moulded groove There are at least three different manufacturers of the repro ones. The ones which fit really well, possibly done on original tooling, suffered some real problems with the quality of rubber a few years ago. I've steered clear of those ever since,Cheers,Bill. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.