Royboy66 Posted August 6, 2007 Share Posted August 6, 2007 Got the propshaft off at the mo, but not 100% sure which way it goes back in!? :-/, Is the sliding joint end at the back or the front!?,I cant remember!Roy 8) Link to comment Share on other sites More sharing options...
Royboy66 Posted August 6, 2007 Author Share Posted August 6, 2007 OK,that was my guess! cheers!Roy Link to comment Share on other sites More sharing options...
Deleted User Posted August 6, 2007 Share Posted August 6, 2007 A previous thread of mine, about that camber compensator, consensus was the slider went by the diff!I'm not certain what difference it make however Link to comment Share on other sites More sharing options...
Deleted User Posted August 6, 2007 Share Posted August 6, 2007 i would have said sliding end to diff as well Link to comment Share on other sites More sharing options...
elm-phoenix Posted August 6, 2007 Share Posted August 6, 2007 mine is slider to diff Link to comment Share on other sites More sharing options...
Royboy66 Posted August 7, 2007 Author Share Posted August 7, 2007 oh! clear as mud now then! lol. ok will go with majority and put it at the diff end!cheersRoy. Link to comment Share on other sites More sharing options...
Tim Bancroft Posted August 7, 2007 Share Posted August 7, 2007 I have always thought it should be at the diff end. Doubt it makes any real difference. Link to comment Share on other sites More sharing options...
Clive Posted August 7, 2007 Share Posted August 7, 2007 Workshop manual shows pic with slide joint at the diff end (page 2.405 if anybody interested!) Link to comment Share on other sites More sharing options...
Royboy66 Posted August 7, 2007 Author Share Posted August 7, 2007 thanks chaps! diff end it is then! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.