Matt306 Posted July 29, 2021 Share Posted July 29, 2021 I have a nice new heritage Sill for my stag . I assume the jacking points weld inside but they appear too short by some margin... is this me being daft or just poor quality repro parts. Quote Link to comment Share on other sites More sharing options...
Guppy916 Posted August 6, 2021 Share Posted August 6, 2021 When I sorted out my GT6 I added extra uprights to the front cross member to stiffen it ready for jacking, and on the rear I made jacking points under the beer can, these work very well, and of course a nice rubber pad on the jack plate 1 Quote Link to comment Share on other sites More sharing options...
Matt306 Posted August 7, 2021 Author Share Posted August 7, 2021 I think they are just bent over to short, i am going to put some 5mm bar welded at the top to support. Quote Link to comment Share on other sites More sharing options...
mikeyb Posted August 8, 2021 Share Posted August 8, 2021 I'm guessing it doesnt really matter as theyt will be hidden away inside the sills. As long as the sill dimensions are good and fit correctly, just extend or add spacers as necessary. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.