Ningaloo Posted December 5, 2015 Share Posted December 5, 2015 Hi I have a mk 2 1966 spitfire , I have the body off and I'm wanting to lift the engine off the chassisI have the pulley and load leveller ready but I'm not sure where the lifting points are located can anyone help? Quote Link to comment Share on other sites More sharing options...
Mark Hammond Posted December 5, 2015 Share Posted December 5, 2015 Lifting eyes should be on the front and back of the head if not, 2 people can easily lift the engine, or one Hungarian.....Mark Quote Link to comment Share on other sites More sharing options...
drofgum Posted December 6, 2015 Share Posted December 6, 2015 Ningaloo,The front lifting eye is built into the generator adjusting link. The rear one is held to the head by the rear two head nuts on the manifold side. These are on the two studs that are longer than the other nine. Cheers, Paul Quote Link to comment Share on other sites More sharing options...
Velocita Rosso Posted December 6, 2015 Share Posted December 6, 2015 ...or two slings under the crank pully and between sump and backplate Quote Link to comment Share on other sites More sharing options...
Ningaloo Posted December 13, 2015 Author Share Posted December 13, 2015 Thanks all will let you know how I get on Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.