RogerD Posted May 24, 2015 Share Posted May 24, 2015 I have done some reasearch on the Triumph forums, and have decided to buy a HUCO low pressure fuel pump (Max 2,1 PSI) to my Vitesse Mk I. But it seems difficult to find a dealer, can anyone recommend where to buy a HUCO low pressure fuel pump?Thanks in advance,Roger. Quote Link to comment Share on other sites More sharing options...
iggy Posted May 24, 2015 Share Posted May 24, 2015 eurocarb ltd in reading sell huco pumps, I bought mine from ebay but there doesn't seem to be any low pressure ones on ebay at the moment :) Quote Link to comment Share on other sites More sharing options...
don cook1 Posted May 24, 2015 Share Posted May 24, 2015 http://www.ebay.co.uk/itm/360758769989?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITI got mine from these people. Quote Link to comment Share on other sites More sharing options...
RogerD Posted May 24, 2015 Author Share Posted May 24, 2015 Thanks! I just bought mine from Eurocarbs. Looking forward to see how it works!Cheers,Roger. Quote Link to comment Share on other sites More sharing options...
Jonny-Jimbo Posted May 26, 2015 Share Posted May 26, 2015 Where does anyone have these mounted? I have one for my Vitesse but haven't got round to installing it yet. I was going to mount it off the original pump mount on the block, or would the vibrations from the block kill it? Quote Link to comment Share on other sites More sharing options...
don cook1 Posted May 26, 2015 Share Posted May 26, 2015 Mine's on the GT6 bulkhead, also means I cab easily route the pipework to the rear of the engine. Quote Link to comment Share on other sites More sharing options...
RogerD Posted May 26, 2015 Author Share Posted May 26, 2015 Thanks for the picture Don, what do you think of the pump performance? Is it ok? I will post a picture when mine has been installed... Quote Link to comment Share on other sites More sharing options...
Tim Bancroft Posted May 26, 2015 Share Posted May 26, 2015 On my GT6, I have mounted the pump away from my engine on a side valance. On the Saloon, I have mounted the HUCO on a bracket that connects to the original pump mount. No difference with either position, both work well. These pumps do not vibrate, all very smooth, therefore unlike a Facet, I mounted mine straight onto either the valance or engine-no rubber mounts needed. Quote Link to comment Share on other sites More sharing options...
don cook1 Posted May 26, 2015 Share Posted May 26, 2015 "Thanks for the picture Don, what do you think of the pump performance? Is it ok?" Ahh...haven't used it on the road yet. Quote Link to comment Share on other sites More sharing options...
Jonny-Jimbo Posted May 27, 2015 Share Posted May 27, 2015 Cheers Tim,That makes me more comfortable with mounting my HUCO pump on the engine block - my main reason for doing that was so I could use most of the original piping that I only replaced about 6 months ago. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.