alpinemauve Posted April 6, 2007 Posted April 6, 2007 How the frig do they come out?Just brute force and ignorance or is there a special tool/way?
Pete Lewis Posted April 6, 2007 Posted April 6, 2007 Take rivet out of A post bracket, remove door trim panel check should be removeable from inside the door carcass...peter
heraldcoupe Posted April 6, 2007 Posted April 6, 2007 Getting a new rivet in place is the bigger problem....Cheers,Bill
alpinemauve Posted April 6, 2007 Author Posted April 6, 2007 Its the removable from inside the door carcass that is the tough part - there is a retaining clip and the check strap needs to be prised out - need to eat loads of spinach to get them out
heraldcoupe Posted April 6, 2007 Posted April 6, 2007 It's some time since I've done this on an early car, I know there are differences, but surely a swift tap on the end will have the ceck strap rattling around loose inside the door? At full door opening the end locks in position, the tension is easily overcome with the aformentioned tap,Cheers,Bill.
alpinemauve Posted April 7, 2007 Author Posted April 7, 2007 Im off into the garage armed with a heavy hammer
Recommended Posts
Archived
This topic is now archived and is closed to further replies.