BritSpit Posted April 21, 2012 Share Posted April 21, 2012 Hi,Does anyone know how to correct the gaps between the front bumper and 1/4 corner valances and the bonnet, on a Spitfire MK4?I/ve tried adjusting the bonnet via the bolts under the front covers, but a sizeable gap remains.... Any ideas would be appreciated, as they normally fit flush from what I can see on other pictures. Link to comment Share on other sites More sharing options...
Dannyb Posted April 21, 2012 Share Posted April 21, 2012 There should be rubber tubing on top of the valance that makes a seal with the bonnet Link to comment Share on other sites More sharing options...
jamespworth Posted April 21, 2012 Share Posted April 21, 2012 looks like thr rubber is on there but not quite making the seal maybe the bracket is bent slightly Link to comment Share on other sites More sharing options...
Dannyb Posted April 21, 2012 Share Posted April 21, 2012 Also if the bumper hasa slight twist on the end that can bend the valance down Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.