danielbushell Posted June 7, 2012 Posted June 7, 2012 I am a new club member and am currently restoring a spitfire 1500. I am currently rebuilding the rear end, the car was part restored when I acquired it. When fitting the rear valance there is a gap each side of 5mm, has anyone come across this problem before?I was thinking about filling the gap with a thin piece of metal on one end and flattening the lip on the other end, would this be the best way to go about it?
migntig Posted June 7, 2012 Posted June 7, 2012 Will it not pull together with clamps? Are the rear wings welded in place? Try getting some clamps on the flanges, it is suprising how much of a gap will dissapear. If you have enough flange depth, you could try bending it back out and reforming a shallower flange.Happy fiddling !!
JensH Posted June 7, 2012 Posted June 7, 2012 You need to find out why before you bodge it 8)Rearwings: Heritage panels or repro?Original lamp panel?
heraldcoupe Posted June 7, 2012 Posted June 7, 2012 The fit of the rear wing looks pretty evil, have you got any closeups of this area?Cheers,Bill.
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.