Paul Garvey Posted February 25, 2012 Share Posted February 25, 2012 Bit lost....restoring a Mk2 Spitfire and sourced a metal dash out from the States and will reverse for RHD set-up.The master light switch goes in the smaller 9mm hole yet the diameter of the threaded section on the switch I have is 14mm. The switch Ive been given certainly looks 100% correct from on-line catalogues aside this rather important aspect...infact size-wise is more likely to fit in the other hole for the ignition switch.Would someone with an early metal dash mind measuring the diameter of their master light switch hole and threaded section of their master light switch and also if possible posting photos?Many thanks Link to comment Share on other sites More sharing options...
Richard B Posted February 25, 2012 Share Posted February 25, 2012 There's actually three versions up to FC50000; 209744 RHS & 209745 LHS 209745 LHS USA & Canadaand three versions from FC50001; 708801 RHS, 708802 LHS & 708803 LHS USA & Canada Link to comment Share on other sites More sharing options...
Paul Garvey Posted February 26, 2012 Author Share Posted February 26, 2012 Brilliant - thanks! Now to find one... Link to comment Share on other sites More sharing options...
firebobby Posted February 26, 2012 Share Posted February 26, 2012 Paul_Garvey wrote:Brilliant - thanks! Now to find one...Paul, try herehe has a lot of old stockwww.spitbitz.co.uk/ Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.