lancepar Posted May 7, 2015 Share Posted May 7, 2015 Repositioning clutch slave bleed position into the engine bay rather than putting a door in the tunnel.I know this has been done but searching has come up blank.Does anyone have a list of the parts required or a link to how it’s done?Cheers 8) Quote Link to comment Share on other sites More sharing options...
RobPearce Posted May 7, 2015 Share Posted May 7, 2015 I would think you will need: - a short length of brake pipe, male ends, from the slave cylinder (bleed) to somewhere accessible - a female-to-female union (which may be tricky and you may need to use a 3-way) fitted to that pipe and mounted - a bleed nipple in the other end of that union Quote Link to comment Share on other sites More sharing options...
lancepar Posted May 7, 2015 Author Share Posted May 7, 2015 Great stuff.................thanks 8) Quote Link to comment Share on other sites More sharing options...
drofgum Posted May 8, 2015 Share Posted May 8, 2015 lancepar,I believe the union usually used to join the two sections of the brake pipe to the rear wheels is suitable. Cheers, Paul Quote Link to comment Share on other sites More sharing options...
cook1e Posted May 8, 2015 Share Posted May 8, 2015 I used aeroquip hose and fittings on my dolomite for a similar arrangement. See my blog entry:- http://cook1e.blogspot.co.uk/2013/10/clutch-hydraulics-assembled.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.