PI choke cable

[GTRoger]

Don't think I can do without on a PI ?

Problem is, I do have the original LHD choke cable from my donor car but some previous owner pulled the inner cables from the outer. No way I get them back in (I tried...) or is there a trick?

Will it work fitting a single cable attached to the MU and control the trottle by foot?

Obviously I can't get a new cable, maybe there is one for a LHD TR6 PI but don't know if it has the correct lenght.

[Ridgetone Triumph]

Yes you can, :P
I don't have a choke cable fitted on my PI, but it will still start even in the frozen -4 mornings, like last Saturday Brrrrrrr ;D

[DJB_Harvey]

A single cable to the metering unit is all that's required , the early single balance pipe throttle bodies fast idle cam arrangement doesn't work well even when adjusted correctly .

[GTRoger]

DJB_Harvey wrote:

A single cable to the metering unit is all that's required , the early single balance pipe throttle bodies fast idle cam arrangement doesn't work well even when adjusted correctly .

That sounds promising! Thanks for the input, that's one item less to worry about.

[Barry Acclaim Guru]

Try a stag choke cable, that will do the job.

b

[GTRoger]

Wooh I managed to fix the original choke cable! Now I can't find my knob.......  (whistle)

[Barry Acclaim Guru]

Take asperin, gargal twice daily,, and go see the pardre!
;D