markythesparky Posted November 11, 2018 Share Posted November 11, 2018 I am renewing the seals in a j type ovrtdrive and i cant get the cover off the pump made a tool and the other 2 came off ok but no way can i get the one off the punp any ideas would be helpfull . Quote Link to comment Share on other sites More sharing options...
nang Posted November 12, 2018 Share Posted November 12, 2018 I'm afraid I had to use a pin punch to get mine started. Cleaned the holes up afterwards. Are you sure some butcher hasn't gone round the outside and peened the edges with a punch. good luck, I ended buying a book off ebay to see what I was doing. It's working well now though. Tony. Quote Link to comment Share on other sites More sharing options...
markythesparky Posted November 17, 2018 Author Share Posted November 17, 2018 Finaly got it undon with a bit of heat and a bigger hammer. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.