Pete Arnold Posted August 3, 2020 Share Posted August 3, 2020 My Vitesse has passed its MoT once more. However the tester has advised that the windscreen washer nozzles need replacing as one is missing the small ball in the outlet and cannot be adjusted to squirt in the right direction! I am aware that replacements are readily available from the specialist suppliers. However I cannot find any info on how to remove the old ones and fit new ones. Has anyone got any tips please. Quote Link to comment Share on other sites More sharing options...
ferny Posted August 3, 2020 Share Posted August 3, 2020 There's a nut on the bottom where it enters the cabin. You'll see/feel it if you reach up behind the dashboard. Quote Link to comment Share on other sites More sharing options...
nang Posted August 3, 2020 Share Posted August 3, 2020 I found that mine just piddled out. I replaced the pump with a new aftermarket one and had a really good set up.without touching the nozzles. Tony. Quote Link to comment Share on other sites More sharing options...
Pete Arnold Posted August 15, 2020 Author Share Posted August 15, 2020 Quoted from ferny- There's a nut on the bottom where it enters the cabin. You'll see/feel it if you reach up behind the dashboard. Thanks Ferny. Used 7/16 socket with an extension bar and ratchet. The job was easier than I expected. My tip is to stick a small bit of masking tape on the outside of the windscreen in line with nozzle positions. One can then find the correct location when lying on the seats! Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.