MSter Posted January 27, 2013 Share Posted January 27, 2013 I have today started stripping down my clutch master slave cylinder i have got the pushrod arm out and am down to the piston section but just cant get it out it was rusted solid and initially wouldnt even move but have now managed to get the piston moving in and out but cannot get it out completely. I have tried removing the excess rust and crud that has built up but still it wont come far enough forward for me to get it out.Any Suggestions??? Quote Link to comment Share on other sites More sharing options...
dinger Posted January 27, 2013 Share Posted January 27, 2013 From the look of it - replace it ... suspect the bore would be knackered . They are not expensive and that looks like it is past its service life.. Quote Link to comment Share on other sites More sharing options...
mazfg Posted January 27, 2013 Share Posted January 27, 2013 I agree with Dinger....replace it....it's nor worth the hassle for the sake of a few extra quid...peace of mind n all that too! That looks way beyond serviceable! Quote Link to comment Share on other sites More sharing options...
2500 est Posted January 27, 2013 Share Posted January 27, 2013 same here,my clutch and brake master's are the same so brought new one's not worth getting service repair kit's for mine(rusted up in bore's) Quote Link to comment Share on other sites More sharing options...
rubberhead Posted January 27, 2013 Share Posted January 27, 2013 yep,dump it mate,save yourself a lot of time and grief. ;) Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.