Jump to content

Queer Clutch Problem - Please Shoot Me...


Recommended Posts

first you need to know if its front or back thats making it lean,,
shockers... unless they are gas filled or seized std they wont induce a lean as they are not sprung.

jack the car up a little in the middle at the front check for lean at back then jack in middle at the back check for lean at the front,  its easy to assume the wrong end and you spend hours going nowhere.
this makes sure you dont have a low rear due to a high front .  and the lean will be diagonal

if the trunnion bushes have seized they will let the suspension stick in a raised position and may or may not settle .
bent anti roll bar can also induce a lean, easy to test just remove one end ,see where it goes
both ends should be in the same relative place,  


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...