Jump to content

nick69

Recommended Posts

I can only go by a picture but dont want to get one and it not work!!!

Is there any way to rebuild one?? My wipers are struggling to make one pass. I removed the wheel boxes and cable today and cleaned and greased them and they move freely when not attached to the motor. Its like the motor is almost seized!

Link to comment
Share on other sites

Take the wiper motor gearbox apart - you will probably find the grease inside has set rock hard!  Might be worth looking at the motor brushes and polishing up the comm too!  Last thing it could be that the motor rotor does not turn freely in its little phosphor bearings - easy to polish up again!

Link to comment
Share on other sites

[quote by=canleyclassics link=Blah.pl?b=hervit,m=1165678941,s=8 date=1165916208]Are the XK 120 ones worth ought? I rebuilt one recently amongst a load of Herald/Spit ones because it had sat in our core stores for so long it had nearly taken up residency![/quote]

Jag.  XK120 are the same as:
- Triumph TR2
- A-H  100/4,
- A-M  DB2 and DB2-4,
- MG  TC - TF...

should be worth somthing.... 

I don't sell them, so i haven't got a clue what their worth... isn't everything for a 120 worth a penny or 2000?  ;D

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...