Slimboyfat Posted May 22, 2013 Share Posted May 22, 2013 A few years ago we did a run of these on a 'once and for all basis'.We were obliged to have quite a large moq last time, but we were helped out by Bill Davis taking a few.My own motivation was based on needing a few for our own Couriers at some time in the future as and when we got around to restoring them. They all got sold before I put any aside!I have managed to squeeze a few more out of our manufacturer in amongst a large order for other springs, and there will be a few spare if anyone is interested. If this is seen as blatant advertising please remove. Quote Link to comment Share on other sites More sharing options...
heraldcoupe Posted May 22, 2013 Share Posted May 22, 2013 I've had a handful of enquiries about these since the last ones were done. I'll contact those who've asked and tell them to get in touch with you,Cheers,Bill. Quote Link to comment Share on other sites More sharing options...
Davemate Posted May 22, 2013 Share Posted May 22, 2013 Pm sent ! Quote Link to comment Share on other sites More sharing options...
ferny Posted May 22, 2013 Share Posted May 22, 2013 If I can, I most likely will. Quote Link to comment Share on other sites More sharing options...
Steve P Posted May 22, 2013 Share Posted May 22, 2013 PM sent from me too.S Quote Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 25, 2013 Share Posted May 25, 2013 Dave, dont forget to link in maybe a 1" drop plate and 6 long studs to get the camber down a bit .then one of bills deep cover plates to clear the studs there you are a new kit developed Pete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.