Pete Lewis Posted April 22, 2016 Share Posted April 22, 2016 Bsf is 22 tpi unf is 24 probably fit easy being only half a nut and the thread angle allowed a fit as for tighening its only half a nut so limits the torque the same these just need a hand nip with a std spanner, they donrt need wraunching to lock the screwpete Quote Link to comment Share on other sites More sharing options...
Stu 1986 Posted April 22, 2016 Author Share Posted April 22, 2016 The new nuts went on well, I think the BSF nuts had maybe been tapped to UNF or something. Quote Link to comment Share on other sites More sharing options...
piman Posted April 23, 2016 Share Posted April 23, 2016 Hello STRu, that is a good possibility, I think Pete's suggestion is not really likely, even a half nut for that distance will be damaging to the original thread.Alec Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.