Baldry1500 Posted March 19, 2011 Share Posted March 19, 2011 Hi,I was wondering if anyone can advise on what size gap i shoud expect to have between the wheel arch and tyre.On drivers side it appears to be about 1/8th inch from tyre to front valance and on passenger side about a inch. it's similar from top of tyre to top of wheel arch too.I'm unsure as to whether drivers side is wrong or passenger or i'm aimingfor somewhere in the middle.Thanks Link to comment Share on other sites More sharing options...
Richard B Posted March 19, 2011 Share Posted March 19, 2011 Bent antirollbar? Saggy or different springs? Bent chassis? :'( Link to comment Share on other sites More sharing options...
Dannyb Posted March 19, 2011 Share Posted March 19, 2011 how about some pictures with bonnet up and down. Link to comment Share on other sites More sharing options...
Baldry1500 Posted March 21, 2011 Author Share Posted March 21, 2011 OK so I went to take some pics with bonnet up after work today and the wheel is back where i would expect it to be. Rather than where it was on sat.will be checking bolts are all tight Link to comment Share on other sites More sharing options...
Doug Paterson Posted March 21, 2011 Share Posted March 21, 2011 It looks to me like your front valance is bent backwards - bringing it so close to the wheel.I'd whip it off and check if the bracket attaching it to the chassis or the front chassis rail is bent.Look at the angle of the front valance below - definitely not as steep as yours. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.