Hogie Posted July 20, 2018 Share Posted July 20, 2018 Hi Folks, haven't got too much information but I have heard that BMH have stopped making TR7/8 body panels and the press tools may have been scraped. Start collecting what is out there - it will not last. Roger Quote Link to comment Share on other sites More sharing options...
TedTaylor Posted July 20, 2018 Share Posted July 20, 2018 BMH being sponsors of London-Sydney50 will have a stand at Gaydon next week. If you come you could ask them. MUT Quote Link to comment Share on other sites More sharing options...
Beans Posted July 21, 2018 Share Posted July 21, 2018 I read it elsewhere. Sad to read. Would be interesting to hear BMH's response ... Quote Link to comment Share on other sites More sharing options...
Hogie Posted July 31, 2018 Author Share Posted July 31, 2018 Hi Folks, not much interest in this topic on here. However , at Gaydon on Sunday I spoke with a BMH man who put the problem into a different light. BMH stopped making TR7 panels back in 2008 as the dies and stamps were badly worn. They took the decision recently not to get involved again with these. The man also said that they only ever made three panels - door skin, sill and wing repair section (I think) Rimmers had a decent stock many moons ago. Roger Quote Link to comment Share on other sites More sharing options...
nang Posted August 1, 2018 Share Posted August 1, 2018 Rimmers are still listing a lot of panels though not sure who makes them. Tony, Quote Link to comment Share on other sites More sharing options...
Beans Posted August 1, 2018 Share Posted August 1, 2018 They (Rimmer's) probably have them in stock? Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.