Martin M Posted November 11, 2016 Share Posted November 11, 2016 Hi all,I have to make the brake pipes from scratch for my Herald / Vitesse Estate. The pipe from the 4 way union in the engine bay to the rear is splitted. Where is the connector placed? Perhaps roughly a measurement from the front outrigger as a reference.ThanksMartin Quote Link to comment Share on other sites More sharing options...
thescrapman Posted November 12, 2016 Share Posted November 12, 2016 I don'tthik it actually matters as it was split to aid fitting on the production line I suspect,About half way, aim for the biggest gap between the clips. Quote Link to comment Share on other sites More sharing options...
marktheherald Posted November 12, 2016 Share Posted November 12, 2016 12" back from back face of front outrigger on mine. Quote Link to comment Share on other sites More sharing options...
heraldcoupe Posted November 12, 2016 Share Posted November 12, 2016 If you have the regular Herald or non-rotoflex Vitesse layout, the front pipe is 46" long, the rear pipe 53". This depends on matching the curves and exact layout to the original, so there is room for variation.The Vitesse Mk2 layout is different, sorry I don't have those figures, but I would assume the front pipe to be very similar in length.The union sits betweent he front and centre outriggers. It's biased towards the front so the more complicated routing of the front pipe along the bulkhead is more easily achieved. The largely straight rear pipe can be fed through the outriggers more easily,Cheers,Bill Quote Link to comment Share on other sites More sharing options...
Martin M Posted November 13, 2016 Author Share Posted November 13, 2016 just measured. 12 inch from the front outrigger is exactly between the front and centre outrigger.As I have rotoflex setup, I took the rear measures (where the 3 way union is) from my GT6 as a reference.ThanksMartin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.