John Addy Posted March 13, 2016 Share Posted March 13, 2016 Hi again from New Zealand.I have lost the bezel from the wash/ wipe switch on my GT6 mk3. Unfortunately neither the bezel nor switch is available from the usual sources. I have bought the replacement item from Rimmers but find A) it doesn't fit the original hole in the dash and B) even if I drill (as I have done) one of a suitable diameter, the threaded shaft is too short to protrude far enough through the wooden dash to attach the nut. Anybody had a similar problem? And any suggestions please. Regards John Quote Link to comment Share on other sites More sharing options...
don cook1 Posted March 16, 2016 Share Posted March 16, 2016 Can't remember how mine worked but perhaps your original threaded bezel sunk inside the hole?? Quote Link to comment Share on other sites More sharing options...
cook1e Posted March 19, 2016 Share Posted March 19, 2016 You are correct, the original threaded bezel does sit within the hole Don... It's a deep bezel not and the threaded bit is like a tube nut arrangement Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.