Vic Ayres Posted October 14, 2023 Share Posted October 14, 2023 Also, would it be possible to fit spacer without removing spring again? Quote Link to comment Share on other sites More sharing options...
thescrapman Posted October 14, 2023 Share Posted October 14, 2023 37 minutes ago, Vic Ayres said: Also, would it be possible to fit spacer without removing spring again? Yes, studs out, slide spacer in. Quote Link to comment Share on other sites More sharing options...
Vic Ayres Posted October 14, 2023 Share Posted October 14, 2023 Cheers. I assume I would have to disconnect spring ends aswell? Quote Link to comment Share on other sites More sharing options...
glang Posted October 15, 2023 Share Posted October 15, 2023 (edited) I assume you have got the longer shafts fitted? Wouldnt be the first time theyve been mixed up and that affects spring deflection. Theres an inch difference but not sure what the actual measurement is... It might be unnecessary to undo at the ends but depends on the spring. With the wheels off the ground see how it relaxes as you undo the studs.... Edited October 15, 2023 by glang Quote Link to comment Share on other sites More sharing options...
Vic Ayres Posted October 15, 2023 Share Posted October 15, 2023 That all seems OK. Thankyou Glang. Quote Link to comment Share on other sites More sharing options...
glang Posted October 15, 2023 Share Posted October 15, 2023 When fitting a 0.5" block to my Vitesse its original (80000 mile) non-swing spring still pushed lightly against the floor when released so needed two lengths of UNF studding to pull it down enough to fit the normal studs... Quote Link to comment Share on other sites More sharing options...
Vic Ayres Posted October 15, 2023 Share Posted October 15, 2023 Cheers I will be aware of that one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.