DaveKent Posted May 15, 2007 Share Posted May 15, 2007 i am selling a j type overdrive mk2 saloon box, and have been asked by a potential purchaser if it will mate up to a TR4 engine. anybody know???? Link to comment Share on other sites More sharing options...
taffs2win Posted May 15, 2007 Share Posted May 15, 2007 I have recently rebuilt a J type for my TR6 and had a J type box out of my son's Triumph 2000. One thing I do know is that the the saloon has a different clutch plate so this would require changing. Also it is likely that the rear gear box mounting would be different as I found out with my TR6 that was built for A type overdrives. I had to buy an adapter bracket to locate the box. Link to comment Share on other sites More sharing options...
DaveKent Posted May 15, 2007 Author Share Posted May 15, 2007 yes but the tr4 has a different engine, a 2.1litre four pot, that is why i'm asking, all the sixpots can take the box, albeit with different backplates flywheels and clutches and mounts, it' just the old four pot we're not sure about, thank you anyway Link to comment Share on other sites More sharing options...
Andy Flexney Posted May 15, 2007 Share Posted May 15, 2007 the gearbox (casing) will fit but you will have to do the mods mentioned above.AndyF Link to comment Share on other sites More sharing options...
DaveKent Posted May 15, 2007 Author Share Posted May 15, 2007 without altering the input shaft?? Link to comment Share on other sites More sharing options...
Clive Posted May 17, 2007 Share Posted May 17, 2007 Just the clutch plate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.