the_nutter Posted August 10, 2007 Share Posted August 10, 2007 Does any body have a picture of the (preferably polyurethane) differential support bushes with a scale (rape or ruler) in the picture, or even better a sketch with the key dimensions on.Many thanksDavid Link to comment Share on other sites More sharing options...
the_nutter Posted August 12, 2007 Author Share Posted August 12, 2007 Anyone got the dimensions please, OD, thickness, ID? Link to comment Share on other sites More sharing options...
JohnD Posted August 12, 2007 Share Posted August 12, 2007 Sure did.Here's a pic.These spare polyU bobbins are 38mm long, 35mm in diam.The original, steel jacketed originals are slightly smaller, 34.7mm diam. and 32mm long. Good thing Gareth had the PolyUs pressed in for me!He had them made and fitted at James Camden Engineering, 2 Scar Bank, Millers Road, Warwick CV34 5DB, 01926-491347.John Link to comment Share on other sites More sharing options...
the_nutter Posted August 13, 2007 Author Share Posted August 13, 2007 Sorry, I wasn't specify originally, I need the sizes for the front diff mounting bushes. I believe they consist of two bushes (a top and a bottom) which go either side of the mounting bracket that bolts to the front of the diff. They hang from bolt which is part of a permanent mounting point welded to the chassis. This mounting point also acts as a pivot for the handbrake cable. Sorry for the confusion, and does anyone have these dimensions. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.