Jump to content

Steering Wheel Refurbishment


Richard B

Recommended Posts

One of the spokes on the OE MkI PI steering wheel has broken from the rim. :'(

Yes I know MkI PI wheels are like rocking horse poo. :o

Presumably this can be re-welded after the leather rim & foam have been removed. Any recommendations as to who can replace the foam and the leather?  :-/

I have heard that Aldridge Trimming repaired one MKI PI steering wheel; I'll give them a bell on Monday.

Link to comment
Share on other sites

Quote:
Presumably this can be re-welded after the leather rim & foam have been removed.


Yes you should be able to take off the covering and get it rewelded. I seem to remember there was an article about it in Practical Classics many moons ago where they repaired an MGA steering wheel. As for retrimming it afterwards I wouldn't have a clue!

Link to comment
Share on other sites

Stripped it down last night. It has aluminium spokes (with round holes) riveted to a steel rim. The rim then has the foam rubber over it followed by the leather.

Hopefully I can get the rivets replaced (thank you James) and then ship it to Aldridge for re-trimming!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...