Dannyb Posted July 2, 2014 Share Posted July 2, 2014 I know this has been covered many times but there is a lot of conflicting info in the forum.My Spit 1500 Standard suspension fitted with 5 1/2 J wheels with 175/70 R13 tyres.Should they be around 30 psi or may be a little more on the back. I know I could experiment but it is fairly standard and would like to start off as close as possible to the ideal pressures. Quote Link to comment Share on other sites More sharing options...
Pete Lee Posted July 2, 2014 Share Posted July 2, 2014 I was recomended 28PSI all way round years ago, not had any problems. Quote Link to comment Share on other sites More sharing options...
ferny Posted July 2, 2014 Share Posted July 2, 2014 I run 24 front and 26 rear on the herald. 5.5j with 175/70 R13. Quote Link to comment Share on other sites More sharing options...
CHRIS211083 Posted July 2, 2014 Share Posted July 2, 2014 I second ferny on this. 24 front and 26/27 rear.Chris. Quote Link to comment Share on other sites More sharing options...
JohnD Posted July 2, 2014 Share Posted July 2, 2014 Long term strategy - use a tyre tread depth guage and measure the depth across the tread.Repeat at monthly intervalsAny sign of centre wear = overinflated; wear at the sides = under.This will also show if your driving style needs the front camber to be adjusted.John Quote Link to comment Share on other sites More sharing options...
Dannyb Posted July 2, 2014 Author Share Posted July 2, 2014 Thanks Guys Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.