system6 Posted August 12, 2014 Share Posted August 12, 2014 Hi again all Trying to get seals for rear brake cylinder (Late mk3 GT6 non rotoflex) , O/D of seal 3/4" and I/D 7/16" , but apparently o/d seal size should be either 5/8" or 7/8" ...Spoke to Rimmers and Canleys but not much help ...I did order Mk1 3/4" seals but when they arrived today the I/D was 5/16"... ...HELP NEEDED Quote Link to comment Share on other sites More sharing options...
heraldcoupe Posted August 12, 2014 Share Posted August 12, 2014 I can't quote the correct internal seal diameters, but this mi-match is something I've previously encountered. Chances are the cylinders you're attempting to re-seal are aftermarket replacement parts rather than originals. The seal kits will be made to match Girling parts, where repros often differ in their internal design,Cheers,Bill. Quote Link to comment Share on other sites More sharing options...
nang Posted August 12, 2014 Share Posted August 12, 2014 I wouldn't bother trying to fix this one. Probably safer and cheaper to get a new cylinder.Tony. Quote Link to comment Share on other sites More sharing options...
mjwman Posted August 13, 2014 Share Posted August 13, 2014 Yes why bother with seals with the price of new cylinders? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.