Martin M Posted May 13, 2016 Share Posted May 13, 2016 Hi,I´m changing the Herald bonnet to Vitesse style via a new headlamp Panel.I was advised to have a gap that has to be filled below the headlamps. However, the depth of the panel in the headlamp area seems to be a Problem as well.Has someone a bonnet where he can measure the depth of the headlamp panle in that area?A s well I´m intersted in the length of the bonnet measured along the line of the wing where it is welded to the bonnet.CheersMartin Quote Link to comment Share on other sites More sharing options...
scotty71 Posted May 13, 2016 Share Posted May 13, 2016 you will have a problem with the profile at the bottom. if you have the 1360 wings, they bow out at the front due to the shape of the head light bow. I was going to the same as your self, but found the new pressing are smaller.I did find in the practical classic book on the herald, were they had a 1360 wing on the vitesse which had modded.lots of cutting. good luck. Quote Link to comment Share on other sites More sharing options...
Martin M Posted May 13, 2016 Author Share Posted May 13, 2016 ... and a further request: the length of the bonnet along the seam below the weld of the wing to the bonnet. Quote Link to comment Share on other sites More sharing options...
Nick Jones Posted May 13, 2016 Share Posted May 13, 2016 Martin, I have a couple of bonnets here to measure (one of them as the factory made it) but I confess I don't quite understand which measurements you want?Nick Quote Link to comment Share on other sites More sharing options...
Martin M Posted May 13, 2016 Author Share Posted May 13, 2016 Hi Nick,what I need see belowMartin Quote Link to comment Share on other sites More sharing options...
Nick Jones Posted May 13, 2016 Share Posted May 13, 2016 Ok, try these. Hope I understood right?Nick Quote Link to comment Share on other sites More sharing options...
Martin M Posted May 14, 2016 Author Share Posted May 14, 2016 Thank you very much that helps.Martin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.