WIMPUS Posted January 29, 2013 Share Posted January 29, 2013 hi i bought a plastic trim for the rear glass from the hardtop .. but it's to short :-/ Now where on ebay or something can i find it ? Also you need to have a tool for it .. am i right ? If Yes , where do i find it :) Quote Link to comment Share on other sites More sharing options...
Bainzy Posted January 29, 2013 Share Posted January 29, 2013 Only tool you need is a hairdrier. Get it really warm before you install it and it should just push in easily and bend freely.Mine was very slightly short too, though with careful positioning of the corner pieces I've pretty much hid it. Annoying though, suppliers cheaping out over 2cm of material ends up ruining the finish of someones car. Quote Link to comment Share on other sites More sharing options...
WIMPUS Posted January 29, 2013 Author Share Posted January 29, 2013 1381 wrote:Only tool you need is a hairdrier. Get it really warm before you install it and it should just push in easily and bend freely.Mine was very slightly short too, though with careful positioning of the corner pieces I've pretty much hid it. Annoying though, suppliers cheaping out over 2cm of material ends up ruining the finish of someones car.don't have the corner pieces , i heard that you can't find them :-/ Mine was really short , 15cm or so :-/my brother told me to but the trim in hot water for a while :) but i did'nt know that you can do it with your hands :P Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.