Royboy66 Posted August 12, 2010 Share Posted August 12, 2010 Anyone got any pics of the swingspring rear brake hosebracketry set up around the rear backplate area ? ;)Thankyou Please! 8) Link to comment Share on other sites More sharing options...
TimW Posted August 12, 2010 Share Posted August 12, 2010 whats the problem Roy? Link to comment Share on other sites More sharing options...
Royboy66 Posted August 12, 2010 Author Share Posted August 12, 2010 no probs mate, just want to see what it should look like, i went from roto to swingspring,so not sure what should be there :) Link to comment Share on other sites More sharing options...
Pete Lewis Posted August 13, 2010 Share Posted August 13, 2010 you need a short length of bundy, accutely bent as soon as it exits the wheel cyl. sleeve nut and routes down to a support bracket you bolt to the back plate, sorry no photo, you need the re route and tight bend to allow the eye end of the spring to clear ,or it will soon wear through the original fitting ... Pete Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.