JimEB Posted February 27, 2016 Share Posted February 27, 2016 Hi,I'm after recommendations for decent, reliable people that can balance engine components properly: crankshaft, flywheel, conrods and pistons.Preferably not too far from me - I'm based in Hampshire.Thanks 🙂 Quote Link to comment Share on other sites More sharing options...
Tim Bancroft Posted February 28, 2016 Share Posted February 28, 2016 Jim,Tom Key has used these, great results.http://vibrationfree.co.uk/ Quote Link to comment Share on other sites More sharing options...
oil_on_the_carpet Posted February 28, 2016 Share Posted February 28, 2016 Just up the A34. Been in business forever and do good workhttp://www.oselli.com/service/engineering/balancing Quote Link to comment Share on other sites More sharing options...
JimEB Posted February 28, 2016 Author Share Posted February 28, 2016 Thank you both for your suggestions 🙂Tim: interesting to read about the Sterling Rattler damper...bit like Shacktune's, eh? Quote Link to comment Share on other sites More sharing options...
TedTaylor Posted February 28, 2016 Share Posted February 28, 2016 South Cerney Engineering near Swindon. Not used them myself but well recommended by people who I really trust and with masses of experience.DON'T use MAYNARDS in Nailsworth - they bu**ered up the regrind on my Mk1 PI crank and never had the grace to admit it 🙁MUT Quote Link to comment Share on other sites More sharing options...
Mark Hammond Posted February 28, 2016 Share Posted February 28, 2016 I used Sutton rebore for mine.Mark Quote Link to comment Share on other sites More sharing options...
DaveKent Posted February 28, 2016 Share Posted February 28, 2016 Vibration Free are excellent for all kinds of balance issues, from engine components, torque converters, propshaft and driveline and anything else that may rotate/vibrate!! Quote Link to comment Share on other sites More sharing options...
oil_on_the_carpet Posted February 29, 2016 Share Posted February 29, 2016 Quoted from Mark Hammond I used Sutton rebore for mine.Mark Thats a blast from the past! http://www.srsengineeringsutton.co.uk Quote Link to comment Share on other sites More sharing options...
bodders1 Posted March 14, 2016 Share Posted March 14, 2016 Which part of Hampshire? If anywhere near M3, try Roe Engineering in Fleet. They have a very good reputation locally. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.