Jump to content

Doig

Recommended Posts

We put TR6 steels on Gertie (Mk1) for the RBRR, and fitted em with 205/65/15s. 

Rears are fine but we had to roll in the front arch lips slightly and on full lock they just scuff the spot welded flange where the inner arch and the wing closing panel meet behing the wheel, so slightly too big there I think!

Mind you, the grip is now phenomenal compared with before on 175R13, even thought the tyres are budgets.  When checked against the satnav, the speedo reading (previously over 10mph out) was almost correct.

Interstingly when we pulled the spare out of the boot, it turned out to be an original(?) crossply, with a diameter almost the same as the 15's!

Link to comment
Share on other sites

[quote by=MikeyB link=Blah.pl?b=2000,m=1137032525,s=30 date=1165871827]

Interstingly when we pulled the spare out of the boot, it turned out to be an original(?) crossply, with a diameter almost the same as the 15's![/quote]

My point exactly, quite liked my old hub caps but look how 'under tyred' it looked on its old tyres.

My spare was a G800 and it was enormous compared to the old 185 70 R13's about the same size as the new 195/70 r14's

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...