Ceaser Posted December 3, 2011 Share Posted December 3, 2011 Chaps,I am looking at making my own door gap ajuster for a MKIV, I have had a look on rimme's etc and I can not see how it attach's to the A piller and still fit the door.Has anyone got any pics.Cheers Ceaser Quote Link to comment Share on other sites More sharing options...
Chambers Posted December 3, 2011 Share Posted December 3, 2011 Ive seen these previously and wondered. Is it just a case of fitting them, cut the cill, extend it out then just weld the sill back up? I know that sounds very simplistic and you have to check the doors etc but Im just checking this is it in a round about way? Quote Link to comment Share on other sites More sharing options...
John Bonnett Posted December 3, 2011 Share Posted December 3, 2011 When you can buy the proper tool for £45 it's surely not worth making your own.http://www.ebay.co.uk/itm/SPITFIRE-GT6-DOORGAP-ADJUSTING-TOOL-WHEN-FITTING-SILLS-/320802661438?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ab154243eregardsJohn Quote Link to comment Share on other sites More sharing options...
Richard B Posted December 3, 2011 Share Posted December 3, 2011 3588 wrote:and I can not see how it attach's to the A piller and still fit the door.If you look at the eBay piccy, the two bolts clamp the seam at both end of the adjuster. I works and well worth having one. At that price I'd say just buy it. Quote Link to comment Share on other sites More sharing options...
Ceaser Posted December 14, 2011 Author Share Posted December 14, 2011 Cheers, the ones I saw in rimmers etc looked like they bolted to the A & B piller but there is no where to bolt to on a MKIV i think there is on a MKIII and begore, when the windscreen is removed??Cheers again Quote Link to comment Share on other sites More sharing options...
mark spit Posted December 14, 2011 Share Posted December 14, 2011 They clamp over the seam where that the door rubber seal fits over. Not bolted to the frame.Mark Quote Link to comment Share on other sites More sharing options...
Nilfisken Posted December 4, 2012 Share Posted December 4, 2012 Hi, re-using an old thread to double check something :)Can the doors easily be opened and closed while this tool is in position? I'm planning to have my body tub on saw horses for quite some time this winter while working on the chassis and want to have something available to minimise sag when working inside the tub for longer periods of time with the door opened or removed. I guess one of these placed in the door gap should make it safer to work on the tub if only one door is opened at a time? Cheers,Oskar Quote Link to comment Share on other sites More sharing options...
josok Posted December 4, 2012 Share Posted December 4, 2012 With the tool in place, it's impossible to close the door. So it's not possible to check the gap with the tool in place The final result here was a poor fit. The next time i use the tool i would first carefully check with the door in place, and then force the body in the right place with the adjuster. I might be tempted to use brute force with the adaptor on the finished car to get the quarter inch that would be needed for a nice fit. Quote Link to comment Share on other sites More sharing options...
Richard B Posted December 4, 2012 Share Posted December 4, 2012 2157 wrote:With the tool in place, it's impossible to close the door. WIth the correct "Doopr gap Adjuster" Tool it is quite easy to open and close the door with the adjuster in situ. This allows you to adjust the fit as you go.Don't trust a side with the door fitted and no gap adjuster, if doing floor/sills, as the bodywork will sag.... :'(Best get two, or weld some braces in when the gap is correct! Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.