Anthony Posted August 13, 2012 Share Posted August 13, 2012 Why are the brake and clutch master cylinder brackets different?The brake one has a small strengthener welded near the top nutThe clutch one doesn't have this small plate thoughAny ideas? Link to comment Share on other sites More sharing options...
markcro Posted August 13, 2012 Share Posted August 13, 2012 I only noticed this a few months ago when I took them off to clean them up and paint them. And then I couldn't remember which was which! I guessed the one with the strengthening bracket was the brake as you would be stamping on that with all your might versus pressing the clutch to the floor. Link to comment Share on other sites More sharing options...
junkuser Posted August 14, 2012 Share Posted August 14, 2012 The pressure applied to the clutch pedal is never high but can be very high on the brake pedal as I'm sure most drivers have experienced. Link to comment Share on other sites More sharing options...
heraldcoupe Posted August 14, 2012 Share Posted August 14, 2012 It was a modification brought in after a few years of Herald production, brake only as already noted. Cheers,Bill. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.