Stuart Wilson Posted October 17, 2017 Share Posted October 17, 2017 I'm in the process of getting some 15" MGF alloys to go on my TR7. What wheel nuts do people use as obviously the TR7 wont fit as needs to be a tapered nut Quote Link to comment Share on other sites More sharing options...
poppyman Posted October 17, 2017 Share Posted October 17, 2017 Hi Stuart, You will find an interesting read about this on the "dolomite" club forum Including which nuts and or studs to use.Cheers, Tony. Quote Link to comment Share on other sites More sharing options...
Clive Posted October 18, 2017 Share Posted October 18, 2017 You need a 60 degree taper nut. I think TR7 are M12?? if so, the std mgf nuts, or from a ford will work fine. I have found used OEM types to be excellent. Or these?https://www.ebay.co.uk/sch/i.h.....el+nuts&_sacat=0(take your pick, as long as they have the taper seat)Just double check the actual threads are M12...., but revington TR site suggests that is what is the factory fit. Quote Link to comment Share on other sites More sharing options...
Stuart Wilson Posted October 18, 2017 Author Share Posted October 18, 2017 Quoted from cliftyhanger You need a 60 degree taper nut. I think TR7 are M12?? if so, the std mgf nuts, or from a ford will work fine. I have found used OEM types to be excellent. Or these?https://www.ebay.co.uk/sch/i.h.....el+nuts&_sacat=0(take your pick, as long as they have the taper seat)Just double check the actual threads are M12...., but revington TR site suggests that is what is the factory fit. Great thanks for that, I knew someone would come along with the info I needed 😎 Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.