Rubce Posted July 23, 2013 Share Posted July 23, 2013 Hi AllHave any of you guys fitted a new headlining to a GT6 which has a Webasto style roof fitted? I am confused as to where to start as I don't have the roof bars to take the weight or act as a point of reference for obvious reasons. Any good tips on how to hold the lining up before the adhesive is applied? Which corner should I start at etc?ThanksBruce Quote Link to comment Share on other sites More sharing options...
Gt6s Posted July 24, 2013 Share Posted July 24, 2013 Sounds like fun. Quote Link to comment Share on other sites More sharing options...
SveinHa Posted July 25, 2013 Share Posted July 25, 2013 My Webasto roof is badly fitted and without headlining. I think I have to remove most of the Webasto and reinstall in a correct way. The lightopening is 5 mm narrower at back so the roof gets stuck when half opened... Job scheduled to winter time, enjoying a ride with half-Webasto during this summer. Hope some good hints will appear in this thread :-) Quote Link to comment Share on other sites More sharing options...
Rubce Posted July 27, 2013 Author Share Posted July 27, 2013 Hi take a look at my other thread for the results. The only roof bar used was the one at the very front.http://club.triumph.org.uk/cgi-bin/forum10/Blah.pl?m-1347478901/s-180/RegardsBruce Quote Link to comment Share on other sites More sharing options...
thehanko Posted July 27, 2013 Share Posted July 27, 2013 I think I have a spare front roof bar if you need one . Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.