Jump to content

Wiper motor gearboxes


Jimmmy0_0

Recommended Posts

Hi All

My wipers are not traveling though their full range, the play in the system seems to be in the wiper motor gearbox as the car is a mk1 pi its a two speed motor.

My question is are the single speed and 2 speed gearboxes the same? (hoping I can swap the motor over)

If their not does anyone know where I can get the one I have overhauled?

Cheers James

Link to comment
Share on other sites

some parts are available places like   http://www.s-v-c.co.uk/

its worth remove the wiper arms, stick a card needle on the spline at 12 oclock ,
pull the cord rack out and note position of needle and   turn 1  it 180 degrees, re fit rack
check needle is now at 6 oclock so rack runs on unworn gear wheel in the wheel box

you should also turn the rack cord over half turn or fit a new one


make sure all the tube clamps are tight and grip the tubes , you want no shift on these tubes .

just some ideas
Pete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...