Jump to content

Communal Spares - Please submit yours.


Recommended Posts

The spares are looking pretty healthy now having just had a few more submissions - thanks guys.

One thing - If possible please include a little bit of detail if you can. For example if you say "Spitfire IV manifold gasket" I've got a fighting chance of finding the part number. "Gasket" tells me nothing and I'll have to get back to you for further details.

Cheers ta as they say in the west...

Link to comment
Share on other sites

I have been through the spares, here is my list.
2000kg Trolley Jack
5 Litre of classic XL 20w/50
½ + ¾ socket set, spanners, screwdrivers etc
Jump leads
1 x set of HT leads
1 x GDC 110 Dist cap
1 x GRA 111 Rotor Arm (MRA38)
1 x GTS 101 Thermostat
2 x CP10A Contact set fits (Dolli 1854/1850 + TR7)
1 x EDC Condenser
1 x Contact Set RCS 207 (Delco 7953448)
1 x No 372 Condenser replaces 54425179
1 x set rear brake shoes
1 x DLB 102 Ignition coil
2 x Wheel cylinders (Pair 4217)
1 x set of Front pads with pins
Copper brake line set
1 x set of alloy wheel nuts (Original Triumph version)
2 x GCB 10900 Fanbelt
Brake Fluid
Brake bleed kit
1 x set of spark plugs

Sorry can't fit a rad in the boot.

sexysi

Link to comment
Share on other sites

Here's mine:

Tools
Breakdown/recovery scheme card     
First Aid kit
Fire Extinguisher
Tow rope
Screw jack
Gaffa Tape (Duct Tape)
WD40 or similar
Bungee cords (luggage elastics)
Cable ties, split pins
Steel and/or copper wire
Electrical connectors and a length or two of wire
Insulation tape
Imperial size nuts and bolts, including wheel nut(s)
Water hoses and hose clips
Petrol hose / tubing.
Olives for water pipes
Fan belt, power steering belt if appropriate
Bulbs
Light switch(es) Fuses
Ignition spares: plugs, points, condenser, dizzy cap, leads, coil
Alternator
Engine oil
Gearbox / axle oil
Foot pump
Sheet of polythene to lie upon if I have to get under the car.
Last time I took a spare mk1 driveshaft- not so sure this time
Also thinking about a piece of clear polythene to act as a windscreen, just been thinking about Carl Shakespeare's unfortunate episode on the last RBRR.

Most of the above is from the 'RBRR Advice Notes' that we issued last year. I can e-mail a copy if anyone wants one. Ellis has gone through all this stuff, but some of it is of interest.

Link to comment
Share on other sites

Car 39 . mk4 Spitfire with 2.5 PI power will have the following on board.(No 4 cylinder spares carried ). Engine and igniton parts for PI and 25 D Lucas dizzy.
PTFE tape
Radweld
60 and 51mm exhaust clamps
j type O/D solenoid.,
GT6 brake pads
Rad. pressure cap
Early PI throttle cable.
6 spark plugs
.7 "  and .625" Girling  cylinder rubber kits.
Tools
towrope with D links.
gearbox oil.
1 litre of engine oil.
Brake fluid.
WD 40.
2 spare wheel nuts for 4 spoke Revolution wheels.
2 dizzy caps.
condensor , points and rotor arms.
Inner control cable and nipple .(repair snapped cable.)
PI vacuum diaphram
Various engine core plugs
Bosch PI fuel pump.
Rocker shaft complete.
PI injector leads
various lengths of wire  & spade connectors
30 amp modern 4/5 pin relay.
horn relay.
cable ties and gaffer tape.
1092 fan belt.
half inch heater hose and clips.
6 cyl. HT leads set.
12V ignition coil.
Drive shaft/Prop UJ.
H4 halogen bulbs .
Stat and  fuel pump gaskets.

Link to comment
Share on other sites

Ben

Usual asst spanners sockets etc.
BAll joint splitter
Bottom Hose 4-cyl
Silicone Brake Fluid
Complete D204 Distributor ready to swap for failed Piranha
FAn belts
Files
Fuses
G-clamp
gasket sealant
grease
hacksaw (junior)
hammer
insulating tape
jubilee clips asst
oil
molegrips
rigger gloves
throttle cables mk4 spit type
top hose 4-cyl
trunnions
tyre weld
UJ-small
water pump
coil - 12v
wire brushes
wire cutters
core plugs
relays
alternator 17ACR
gaffer tape
flasher units
wheel nuts mk4 spit
master cyl kits 0.625 and 0.7
cable ties
princess 4-pot pads
HT leads
Spark plugs
RAd cap
water
Multi-lingual co-driver


Cheers

Colin

Link to comment
Share on other sites

between our two cars we will be carrying:

Mechanical fuel pump
electrical fuel pump
wire
electrical screen washer pump
3 meters of fuel hose
alternator
coils
condensors
rotor arms (4 and 6 cyl)
bulbs
points
spark plugs
contact blocks
fuses
fuse wire
electrical strip connectors
sealed beam unit vitesse (Dip)
core plugs
jubilee clips
red/black (gasket compund)
perfastrip
split pins
ptfe tape
thread lock
su hs6 service kit
floats
vac pipe kit
throttle cable
boden cable
threaded bar
nuts bolts washers etc
heater hose
springs tension + compression
distributor
dizzy caps
wiper arm
wiper blades vitesse
adjustable drive belt
vitesse top and bottom hose
gasket paper

Is that enough?  ;D

Link to comment
Share on other sites

I've just acquired a spare electronic ignition set for my Stag (backup 10CR car) its a Newtronic (formerly Pirahna) kit for Stag and Rover V8's - Kit no CKT05A - if any of you V8'ers are using this system, I'll gladly carry it as a spare in the Spitfire.

Link to comment
Share on other sites

I've just acquired a spare electronic ignition set for my Stag (backup 10CR car) its a Newtronic (formerly Pirahna) kit for Stag and Rover V8's - Kit no CKT05A - if any of you V8'ers are using this system, I'll gladly carry it as a spare in the Spitfire.

Link to comment
Share on other sites

Roy & Jules, car 26, Gt6 mk1, 2.5, rotoflex,lucas 22d6 dizzy,HS6 carbs.!

The usual tool kit of sockets,spanners etc, I will list anything out of the ordinary..


clutch m/c seal kit
brake m/c seal kit
clutch slave cylinder
AC fuel pump kit (bd6)
D type o/drive solenoid
2xtrunnions, RH & LH
TR end
heater valve
front wheel bearing
rear wheel bearing(rotoflex)
flasher unit (FL5)
rear wheel cylinder(t101)
points set,condenser(22d6)
ignition coil(12v)
head gasket set(non recessed block)
gearbox front & rear seals( 3 rail,d type)
choke cable( T knob)
throttle cable
top hose
1 litre gear oil
1 litre duckhams 20/50
H2o !
0.5l brake fliud(dot 4)
front pads (16p caliper)
overdrive relay( lucas 6RA)
Front crank pulley bolt !
dizzy cap(22d6)
input shatf tool(clutch alignment)
fuel hose
brake pipe fittings
heater hose


so far..........! :)


Roy 8)

Link to comment
Share on other sites

Roy & Jules, car 26, Gt6 mk1, 2.5, rotoflex,lucas 22d6 dizzy,HS6 carbs.!

The usual tool kit of sockets,spanners etc, I will list anything out of the ordinary..


clutch m/c seal kit
brake m/c seal kit
clutch slave cylinder
AC fuel pump kit (bd6)
D type o/drive solenoid
2xtrunnions, RH & LH
TR end
heater valve
front wheel bearing
rear wheel bearing(rotoflex)
flasher unit (FL5)
rear wheel cylinder(t101)
points set,condenser(22d6)
ignition coil(12v)
head gasket set(non recessed block)
gearbox front & rear seals( 3 rail,d type)
choke cable( T knob)
throttle cable
top hose
1 litre gear oil
1 litre duckhams 20/50
H2o !
0.5l brake fliud(dot 4)
front pads (16p caliper)
overdrive relay( lucas 6RA)
Front crank pulley bolt !
dizzy cap(22d6)
input shatf tool(clutch alignment)
fuel hose
brake pipe fittings
heater hose


so far..........! :)


Roy 8)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...