Jump to content

10CR Sticker Positions


SteveJP

Recommended Posts

GT6_Don wrote:
I've always thought that the stickers should be parallel to the ground i.e. the cill and bottom of the door, you could use a spirit level I suppose.



I tried that Don, but because of the black pinstripes on my Spit they looked a bit odd, so I've aligned them exactly in line with the Stripe which takes your eye away from the sill line

Link to comment
Share on other sites

Mine are now applied, with plenty of polish beneath them as suggested by Mike Helm at the drivers meeting last week.

I eventually decided on the rear wing position for the climate care one as shown in my first picture on this thread, this was because that the alignment was easier there with the small swage line behind the wheel arch.


Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...